Product Introduction：
HB series light oil sliding vane pump is a kind of positive displacement pump. Operating principle: Gliding slab installed in slotted rotor，The rotor eccentrically installed in the pump body. When the rotor turns, gliding slab slide off the rotor, clinging to sliding inside the surface of the pump. The space size of cavity formed by rotor, gliding slab and pump body varies periodically as the rotor turns— When the cavity increased, it inhale medium, and when it decreases, medium is discharged. Going round and round, it completes the process of conveying medium.
The main technique parameters:
Nominal diameter（mm）：DN25~100
Flow-rate range:（m3/h）:2.70~115.7
Operating differential pressure：（MPa）:0.20~1.00
Pumped medium：Gasoline, kerosene, diesel oil and other lightweight oils
Operating temperature（℃）：-40~+80
Technical standards：JB/T10459-2004 sliding vane pump
Applications:
HB series light oil sliding vane pump can not only be used in fixed equipment, such as applied for the discharge of oil in depot, replaced vacuum system to pump bottom oil, and clean storehouse, oiling in fixed installation, but also commonly used in fuel truck and oil tank truck etc.
